Law enforcement and public safety officers conduct some of the most dangerous jobs while on duty. An often-overlooked threat on duty are needlesticks. An accidental needlestick during a pat-down or search and seizure operation can have major consequences.

 

Needlestick injuries expose law enforcement officers to various dangers like bloodborne pathogens (diseases) such as Hepatitis B and C, and HIV, which can be extremely detrimental to your health. In fact, 30% of law enforcement officers across the nation will be accidentally pricked by a needle at least once in their career.

 

So, how can you mitigate some of these potential hazards? Let’s take a look.

 

General Duty Gloves:

When searching for safety gloves that provide the high level of needlestick resistance you need in these situations, it can become overwhelming.

 

But don’t worry, we’ve got you covered.  

 

We have some of the highest levels of needle-resistant gloves in the safety industry.

 

HexBlue™ 2134

 

The 2134 is great for pat-down tasks and searches since it offers ANSI/ISEA Level 2 needle resistance on the full palm and back-of-hand, covering the knuckles, up to the middle of the hand. This helps immensely in situations where your hand would be gliding over sharp objects in a car, jammed areas, and in someone’s pockets. Other notable features include touchscreen capabilities, synthetic leather palm for extra grip, and back-of-hand neoprene material that offers wind and liquid resistance. This glove is not recommended during the use of tasers or firearms.

 

HexBlue™ 2135

 

The difference between the HexBlue ™ 2134 (the above-mentioned glove) and the 2135 is not extensive. The main difference is that the ANSI/ISEA Level 2 needlestick-resistance material on the 2135 is on the palm-side only and not on the back of the hand. This allows for additional dexterity during pat-downs and search and seizure operations, while still maintaining a secure level of needlestick resistance. Other notable features include touchscreen capabilities, synthetic leather palm for extra grip, and back-of-hand neoprene material that offers wind and liquid resistance. This glove is not recommended during the use of tasers or firearms.

 

HexBlue™ PointGuard® Ultra 4041

 

If you will be dealing with obvious sharps, like gathering shrapnel from a car accident, for instance, the 4041 would be your glove. The 4041 offers extreme ANSI/ISEA Level 5 needlestick resistance and Level A9 cut resistance on the palm side of the glove with three layers of SuperFabric® brand material and Level 2 needlestick resistance on the nail tip of the fingers (minus the thumb) with one layer of SuperFabric®. Other notable features include an abrasion-resistant silicone palm and back-of-hand knuckle padding for extra protection against accidental bumps. This glove is not recommended during the use of tasers or firearms.

 

HexBlue™ PointGuard® Ultra 4045

 

For daily use, the 4045 will protect you from various sharps and needles that you may encounter. These encounters could occur during home, car, and residence searches. The interior palm offers ANSI/ISEA Level 2 needlestick protection and Level A7 cut protection with one layer of SuperFabric®. The fingertip (pad area) is equipped with two layers of SuperFabric® that offers Level 3 needlestick protection. This glove is not recommended during the use of tasers or firearms.

 

“Break-in Process”

The extreme needle resistance available in HexBlue™ gloves is made possible due to our exclusively licensed SuperFabric® brand material that’s extremely puncture and needle resistant, helping you to stay protected from life-changing injuries.

 

It is important to note that due to the extreme level of needle resistance, the gloves mentioned above require a “break-in” period to allow for more dexterity.

 

Follow the steps below to break in your gloves:

Step 1:

Remove the glove from the packaging to massage and bend the palm and finger areas. Roll the seams between your fingers to relax some of the stitching.

Step 2:

Put the gloves on to let the heat of your hands warm up the material and repeatedly open and close your hand to reduce the stiffness of the gloves.

Step 3:

Wear the gloves around your house for a few days to allow the gloves to mold to your hands and your desired comfort.

 

If you find that after this process, the gloves do not meet your standards, please reach out to us and we can help you find a glove that meets your dexterity and protection needs.

 

Tactical Safe Gloves:

For times when you’re actively engaging your taser or firearm in training or in urgent matters, Hex 1® safety gloves are your go-to gloves.

 

        

HexBlue™ Hex1® 2132 – Black or Coyote

 

Whether you’re in training for firearm use or at the range for the day, the 2132 is perfect for all-day use. With no SuperFabric®, you can expect extreme dexterity for finite hand and finger movements. The synthetic leather palm allows for extreme grip with a soft, back-of-hand thumbpad for a convenient brow cloth to wipe away sweat. Lastly, use all of your technology with ease with the touchscreen-capable fingertips. The 2132 comes in a Coyote color that matches most everyday military camouflage. This glove does not offer needlestick resistance.

 

Still need help deciding on the right glove?

 

We’re here to help. If you have any questions or concerns, you’d like to discuss please send us a message at info@safetygloves.com to get in touch. Lastly, we’d like to personally thank our law enforcement officers for working the front line and ensuring our safety every day.